Select all the quality elements (QEs) monitored at this surface water monitoring site from the enumeration list.
Previous comments
4
SE - Sweden (invited by kristpet (disabled))
22 Mar 2019 13:28:56
What level of QE is required to report? It should be the same elements for which status are determined. So that schema intercalibration is possible?
BE-Fl Belgium Flanders (invited by kristpet (disabled))
27 Mar 2019 10:03:02
It is a lot of work to fill in the frequency and cycle for each site separately. Can't this be filled in per program or per group of sites.
LU - Luxembourg1 (invited by kristpet (disabled))
25 Apr 2019 11:30:47
As information regarding the monitoring of RBSPs is reported in detail in class "ChemicalMonitoring", the option "QE3-3 - River Basin Specific Pollutants" should be deleted here. Otherwise information will be reported twice.
PL - Poland1 (invited by kristpet (disabled))
03 May 2019 14:51:31
It is necessary to adapt the method of reporting data on nitrogen and phosphorus compounds by adding the following physicochemical elements: nitrate nitrogen, nitrite nitrogen, ammonium nitrogen and orthophosphate phosphorus.
You cannot post comments to this consultation because you are not authenticated. Please log in.
Previous comments
What level of QE is required to report? It should be the same elements for which status are determined. So that schema intercalibration is possible?
As information regarding the monitoring of RBSPs is reported in detail in class "ChemicalMonitoring", the option "QE3-3 - River Basin Specific Pollutants" should be deleted here. Otherwise information will be reported twice.
Schema: Monitoring, class: SWEcologicalMonitoring, atribute: qeCode –
It is necessary to adapt the method of reporting data on nitrogen and phosphorus compounds by adding the following physicochemical elements: nitrate nitrogen, nitrite nitrogen, ammonium nitrogen and orthophosphate phosphorus.